Thesis

• Elena Sofia Abbagnato. Conceptual Design Methodology to size a Supersonic Passengers Aircraft Using LH2. Rel. Nicole Viola, Roberta Fusaro, Davide Ferretto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Joao Alexandre Abreu Coelho. Aerothermodynamic Analysis of Aerocapture and Ballistic Entry Flows in Neptune Atmosphere. Rel. Domenic D'Ambrosio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Pierre-Loic Albrieux. Studio numerico e analitico dell'impatto della grandine su strutture aeronautiche. Rel. Marco Gherlone, Massimiliano Corrado Mattone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Mario Ali'. Sviluppo e validazione di un metodo di ordine ridotto per lo studio del flusso su un rotore = Development and validation of a reduced order method for the study of flow on a rotor. Rel. Domenic D'Ambrosio, Manuel Carreno Ruiz. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Ivana Allocca. Preliminary design of an arcjet in the 1kW class for space application. Rel. Lorenzo Casalino, Marco Manente. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Giovan Battista Alogna. Magnetically Enhanced Plasma Thruster: Optimization of a magnetic nozzle through numerical simulation. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Paola Altobello. Studio dell’influenza dei trattamenti di post-processo sulla superlega Inconel 939 prodotta per selective laser melting = Study of post-process treatments on Inconel 939 superalloy produced by selective laser melting. Rel. Sara Biamino, Giulio Marchese. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Enrico Amico. Controllo della scia di corpi tozzi mediante Reinforcement Learning = Active flow Control of a bluff body wake by Reinforcement Learning. Rel. Gaetano Iuso, Gioacchino Cafiero. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Alessio Andreoletti. Scambio termico in flussi turbolenti con particelle sospese in presenza di gradiente di temperatura imposto = Heat exchange in turbulent flows with suspended particles forced by an imposed temperature gradient. Rel. Michele Iovieno. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Riccardo Apa. Modellazione, dinamica e controllo di sistemi distribuiti orbitanti = Modeling, Dynamics, and Control of Orbiting Distributed Systems. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Giacomo Attrotto. Metodo di penalizzazione di Brinkman per flussi compressibili = A Brinkman penalization method for compressible flows. Rel. Francesco Larocca, Andrea Ferrero. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Bogdan Baetu. Analisi del repertorio manutentivo per un aeromobile ad ala rotante = Analysis of maintenance operations on a rotary-wing aircraft. Rel. Giorgio Guglieri, Salvatore Brischetto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Leonardo Baldo. Development of an experimental test bench for the validation of prognostic algorithms for electromechanical actuators. Rel. Matteo Davide Lorenzo Dalla Vedova, Paolo Maggiore, Pier Carlo Berri. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Giulia Barbero. Analisi degli effetti microstrutturali dell'aggiunta di Erbio in campioni di leghe di Alluminio prodotti per SLM = Analysis of the microstructural effects of the addition of Erbium in Aluminium alloys specimens produced by SLM. Rel. Mariangela Lombardi, Fabrizio Marinucci, Diego Giovanni Manfredi. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Alessia Basler. Safe Exploration with Safety Layer and reward shaping. Rel. Manuela Battipede. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Giorgio Baudino. Multirotor Design and Modeling for Indoor Applications. Rel. Elisa Capello, Davide Carminati, Iris David Du Mutel De Pierrepont F. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Stefano Berlingeri. Multi-fidelity strategies for Navier-Stokes equations. Rel. Sandra Pieraccini. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Marco Bertuccelli. Monitoraggio termico con sensori Fiber Bragg Grating = Thermal monitoring through the implementation of Fiber Bragg Grating sensors. Rel. Paolo Maggiore, Matteo Davide Lorenzo Dalla Vedova, Pier Carlo Berri, Gaetano Quattrocchi. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Gabriele Bianco. Analisi prestazionale di una barca a vela da regata tramite Computational Fluid Dynamics con dinamica a tre gradi di libertà = Performance analysis of a racing sailing boat carried out with Computational Fluid Dynamics implementing a three degrees of freedom dynamic model. Rel. Domenic D'Ambrosio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Riccardo Biasco. Emissions analysis routine for subsonic aircrafts using biofuel. Rel. Nicole Viola, Roberta Fusaro, Davide Ferretto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Ivano Billi. Preliminary discussion cost per RLV. Rel. Matteo Filippi, Erasmo Carrera, Alfonso Pagani. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Luca Boggio. Development of an experimental test bench for the validation of prognostic algorithms for electromechanical actuators. Rel. Matteo Davide Lorenzo Dalla Vedova, Paolo Maggiore, Pier Carlo Berri. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Davide Boiani. Main Structural Design Considerations for Reusable Launch Vehicles. Rel. Erasmo Carrera, Alfonso Pagani, Rodolfo Azzara. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Gabriele Bossotto. Urban Air Vehicle implementation and limitations. Development of a new acoustic tool for the noise prediction. Rel. Renzo Arina. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Carlo Brunelli. Thermochemical Models for Hypersonic Regime. Rel. Domenic D'Ambrosio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Edoardo Bruno. Satellite Formation Flying Initial Configuration Maintenance Using Impulsive Maneuvers. Rel. Giorgio Guglieri, Franco Bernelli, Reza Raymond Karimi. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Riccardo Brusa. Metodo di calcolo per la definizione della traiettoria di un carico mediante sensore 6DoF = Calculation method for defining the trajectory of a load using a 6DoF sensor. Rel. Dario Giuseppe Pastrone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Beatrice Burocco. Applicazione di metodologie per il dimensionamento preliminare della struttura dell’ala di un velivolo UAV = Application of methodologies for preliminary sizing of the wing structure of a UAV aircraft. Rel. Erasmo Carrera. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Alessandro Camerota. Study and realization through additive manufacturing of an aeronautical leading edge prototype integrating the de-icing function. Rel. Paolo Maggiore, Matteo Davide Lorenzo Dalla Vedova, Carlo Giovanni Ferro. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Francesca Cantatore. Misura della forza durante l'impatto: simulazioni numeriche e prove sperimentali = Force measurement during impact: numerical simulations and experimental tests. Rel. Marco Gherlone, Massimiliano Corrado Mattone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Alessandro Cantu'. Dimensionamento e definizione delle leggi di controllo di un attuatore elettro-idrostatico per il controllo del passo del rotore di coda di un elicottero = Sizing and definition of the control laws of an electro-hydrostatic actuator for tail rotor pitch control of a helicopter. Rel. Massimo Sorli, Giovanni Jacazio, Andrea De Martin. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Andrea Caporali. Development of biodegradable air balloons for mini green radiosonde to measure fluctuations within warm clouds. Rel. Daniela Tordella. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Fabrizio Casagrande. Manipolazione delle streaks di bassa velocità mediante riblets sinusoidali. Rel. Gioacchino Cafiero, Gaetano Iuso. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Enrico Nicola Cassano. Analisi fluidodinamica di una presa d'aria per motore turbofan in condizioni di fuori-progetto = Fluid dynamics analysis of an air intake for a turbofan engine in off-design conditions. Rel. Francesco Larocca, Andrea Ferrero. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Francesco Cavallo. ANDROMEDA: Mission Design and Attitude Optimization for a Constellation of Microsatellites in Lunar Orbit. Rel. Ladislau Matekovits. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Matteo Cazzola. Aerodynamic study of a gooseneck. Rel. Andrea Ferrero. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Jose Maria Cejudo Ruiz. Design and development of innovative asymmetry active monitoring techniques for high-lift actuation systems. Rel. Paolo Maggiore, Matteo Davide Lorenzo Dalla Vedova. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Davide Celestini. Navigation and Guidance Algorithms for In-Orbit servicing Rendezvous Mission. Rel. Elisa Capello, Massimiliano Saponara. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Agostino Cembalo. Analysis of innovative aerodynamic devices on production vehicles. Rel. Renzo Arina, Yann Goraguer, Christophe Corre. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Giovanni Cena. Development of a fault-tolerant software for a CubeSat Test Platform. Rel. Sabrina Corpino, Fabrizio Stesina. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Andrea Ceratto. Normativa produzione additiva: analisi e applicazioni aerospaziali = Additive manufacturing legislation: analysis and aerospace applications. Rel. Giacomo Frulla, Matteo Vazzola. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Andrea Cesana. Valutazione delle tendenze attuali sull'applicabilità dei droni alla mobilità urbana e metodologie di analisi di rischio a terra = Assessment of current trends on the applicability of drones to urban mobility and ground risk analysis methodologies. Rel. Giorgio Guglieri, Stefano Primatesta. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Domenico Cesare. Metodologie avanzate nelle analisi 3D termoelastiche di strutture composite = Advanced methodologies for 3D thermoelastic analyses of composite structures. Rel. Salvatore Brischetto, Roberto Torre. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Giovannino Cirullo. Investigation of RANS reliability for transonic airfoils. Rel. Renzo Arina. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Francesco Civerra. Optimization of a Transonic High-Pressure Stage aimed at Coupling with Pressure Gain Combustors. Rel. Daniela Anna Misul, Simone Salvadori, Mirko Baratta. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Giuseppe Colella. Numerical Simulation of a Supersonic Inlet under Off-Design Operating Conditions. Rel. Francesco Larocca, Andrea Ferrero. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Francesca Coletta. Sviluppo di un modello collisionale Monte Carlo accoppiato con un modello Particle-In-Cell per la simulazione numerica di un Cathode-less RF plasma thruster = Development of a Monte Carlo collision model coupled with a Particle-In-Cell model for a Cathode-less RF plasma thruster numerical simulation. Rel. Lorenzo Casalino, Marco Manente. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Antonio Coluccia. Modeling and simulation of lightweight lattice structures for impact energy absorption. Rel. Giorgio De Pasquale, Christian Mittelstedt, Guillaume Meyer. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Leonardo Conti. Development of numerical tools for the analysis of near-field acoustic data. Rel. Sandra Pieraccini. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Antonio Giulio Coretti. Tecniche di nowcasting mediante radar meteo di fenomeni intensi di precipitazione = Nowcasting techniques of intense precipitation phenomena using weather radar. Rel. Pierluigi Claps, Roberto Cremonini, Renzo Bechini. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Nicolo' Crichigno. Deep Learning for prediction of Aerodynamic Simulations. Rel. Sandra Pieraccini. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Federica Cuccovillo. Dinamica non lineare di giunti "dovetail" = Nonlinear dynamics of dovetail joints. Rel. Daniele Botto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Alessandro D'Addosio. CFD thermal analysis of a high-voltage battery pack for plug-in hybrid vehicle applications. Rel. Domenic D'Ambrosio, Matteo Gautero. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Antonio D'Ortona. Desing of Sliding Mode Techniques for a CMG-based Testbed Attitude Control System. Rel. Elisa Capello, Satoshi Satoh. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Leonardo Dall'Osto. DESIGN OF THE EVAPORATOR FOR A SPACE ENGINE – FLUIDICS ANALYSIS AND NUMERICAL SIMULATIONS. Rel. Roberto Marsilio, Riccardo Mantellato. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Simone Dascanio. Design of Guidance and Algorithms for Space Rendezvous Maneuvers. Rel. Elisa Capello, Hyeongjun Park. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Carlo De Micheli. Optimizing Satellite Constellation Orbits for Low Latency Internet Connections. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Davide De Mori. Flying Qualities of Multi-rotor UAVs: market analysis and parameter definition. Rel. Elisa Capello, Gianluca Ristorto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Melania Del Pellaro. Studio fluidodinamico di palettatura supersonica. Rel. Francesco Larocca, Andrea Ferrero. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Oronzo Dell'Edera. Extreme events WEC design load cases. Rel. Giuliana Mattiazzo, Giovanni Bracco, Bruno Paduano. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Edoardo Dell'Erba. Low-Order Prediction Methodology for Multi-Rotors Tonal Noise. Rel. Domenic D'Ambrosio, Renzo Arina, Christophe Schram, Julien Christophe. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Gennaro Della Volpe. Optimization of a Cathode-less plasma thruster. Rel. Lorenzo Casalino, Mirko Magarotto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Gianmarco Dessi'. ICAO – Annex X volume IV: analysis of requirements and their implementation. Rel. Paolo Maggiore, Matteo Vazzola, Daniele Canziani. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Luca Di Ianni. Control System Design with Reinforcement Learning Algorithm for a Space Manipulator. Rel. Elisa Capello. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Gennaro Denis Di Leone. Confronto tra più architetture di circuito a fluido bifase meccanicamente pressurizzato e relativo progetto preliminare per MMRTG di rover marziano = Comparison between multiple two-phase mechanically pumped fluid loop architectures and their preliminary design for MMRTG of martian rover. Rel. Paolo Maggiore, Matteo Davide Lorenzo Dalla Vedova, Davide Luca Janner. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Vincenzo Alberto Di Michele. Waterfall Project Management vs. Agile Project Management: metodologie a confronto e implementazione nel campo aeronautico. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Fabiola Di Stasio. CONTROL SYSTEM DESIGN OF A HIGH ALTITUDE PSEUDO SATELLITE IN THE STATION KEEPING PHASE. Rel. Paolo Maggiore, Matteo Carta. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Luciano Distefano. Analisi e modellazione del comportamento meccanico di acciai Q&P con metodi di correlazione di immagine. Rel. Paolo Matteis. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Billal Es Saidi. Computational Analysis of a Swirl Distortion Generation Method Using the Wishbone Vortex Generator. Rel. Francesco Larocca. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Salvatore Esposito. Numerical simulation of high-speed and high temperature reacting flows using a commercial CFD software. Rel. Domenic D'Ambrosio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Lucas Fernandes Da Costa Pappacena. Analisi eventi aeronautici: dal quadro normativo alla pubblicazione del Safety Review Europeo = A comprehensive analysis of Aviation Safety Reports in Europe. Rel. Giorgio Guglieri, Beatrice Conti. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Samuele Ferracin. Mechanical behaviour of shape-morphing metamaterial systems and their application as deployable structures for space applications. Rel. Francesco Laviano. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Roberto Ferri. Metodologie per l’identificazione e la regolarizzazione dei carichi esterni su strutture alari a partire da misure di deformazione = Methodologies for the identification and regularization of external loads acting on wing structures starting from discrete strain measurements. Rel. Marco Gherlone, Marco Esposito. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Ciro Fioretto. Applicazione di tecniche di Machine Learning all'ottimizzazione fluidodinamica in campo missilistico = Application of Machine Learning techniques to fluid dynamics optimization in the missile field. Rel. Stefano Berrone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Giovanni Floris. MATERIALI CERAMICI MONOCRISTALLINI PER APPLICAZIONI OTTICHE AVANZATE IN AMBITO AEROSPAZIALE: INFLUENZA DI PARAMETRI COMPOSIZIONALI E DI PROCESSO SULLA QUALITA' DELLA PRODUZIONE = SINGLE CRYSTAL CERAMIC MATERIALS FOR ADVANCED OPTICAL APPLICATIONS IN AEROSPACE: INFLUENCE OF COMPOSITIONAL AND PROCESS PARAMETERS ON PRODUCTION QUALITY. Rel. Laura Montanaro. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Gianmarco Floro. Mars Sample Return: parking orbit optimization and single/multi launch mission comparison using genetic algorithm. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Cristiano Forcella. FATIGUE AND HUMAN FACTOR IN AVIATION. Rel. Paolo Maggiore, Marco Gajetti. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Andrea Forestieri. Optimal low Earth orbit transfers with drag sails. Rel. Lorenzo Casalino, Francesco Topputo. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Agostino Maria Formica. Analisi strutturale di un satellite soggetto a carichi di decompressione dovuti alla fase di lancio = Structural analysis of spacecraft subjected to launch depressurization loads. Rel. Erasmo Carrera, Alfonso Pagani. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Giovanni Frasca. Disposal Analysis Procedure Handbook and Analysis Tool Development- Use Case : " Aircraft Wing". Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Francesco Paolo Frascella. Analysis of Direct Operating Costs estimation of a Supersonic point-to-point vehicle powered by liquid hydrogen. Rel. Nicole Viola, Roberta Fusaro, Davide Ferretto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Lorenzo Frau. Statistical and comparative study on the deviation of the weight calculation for helicopters. Rel. Giorgio Guglieri, Kevin Praden. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Vittorio Friolotto. Mission optimization for LEO space debris removal using graph theory. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Emanuele Fumanti. Analisi modale numerica e sperimentale di un rotore di una macchina elettrica ad alte velocità di rotazione = Numerical and experimental modal analysis of an electric machine's high speed rotor. Rel. Michele Ferlauto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Diego Galassini. Stima dei GHG e delle emissioni inquinanti di velivoli supersonici con biocombustibili in un progetto concettuale = Estimation of GHG and pollutant emissions of supersonic aircraft with biofuels in conceptual design. Rel. Nicole Viola, Roberta Fusaro. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Lorenzo Garibaldi. Eurocargo CNG E6 Exhaust System: Acoustic Simulation and SNGR Approach by Actran. Rel. Renzo Arina, Benedetta Peiretti Paradisi, Federico Millo. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Jacopo Garrone. Design and verification of the Thermal Control System for a Cubesat equipped with a miniaturized electric propulsion system. Rel. Sabrina Corpino, Fabrizio Stesina, Daniele Calvi. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Gianluca Gattuso. Analisi 3D FEM e analitiche per lo studio igro-termo-elastico di piastre e gusci con strati in Functionally Graded Material. = 3D FEM and analytical analysis for the hygro-thermo-elastic study of plates and shells with layers in Functionally Graded Material. Rel. Salvatore Brischetto, Roberto Torre. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Cristiano Geniale. ANALISI DI UN MODELLO DI RIGIDEZZA EQUIVALENTE PER GIUNZIONI BULLONATE A SINGOLA SOVRAPPOSIZIONE = ANALYSIS OF AN EQUIVALENT STIFFNESS MODEL FOR SINGLE OVERLAP BOLTED JOINTS. Rel. Marco Gherlone, Marco Esposito. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Luca Ghivarello. Certification process of a new ultrasonic instrument for Non-Destructive Tests on composite materials. Rel. Salvatore Brischetto, Mario Turconi. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Mattia Gianelli. Modelli unidimensionali per l'analisi modale di palette di turbina. Rel. Daniele Botto, Stefano Zucca. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Raffaele Giordano. Development of a digital twin for the validation of prognostic algorithms for electromechanical actuators. Rel. Paolo Maggiore, Matteo Davide Lorenzo Dalla Vedova, Pier Carlo Berri, Gaetano Quattrocchi. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Matteo Glorioso. Determinazione dei parametri di contatto in un attacco pala di tipo dovetail = Identification of contact parameters in a dovetail blade root joint. Rel. Daniele Botto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Marco Grammatico. Fuel-Optimal Lander Trajectory for Lunar Soft-Precision Landing. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Angelo Alberto Granata. Development and validation of numerical methods for aeromechanical analysis of small HAWT. Rel. Simone Salvadori. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Davide Grassi. Stima della resistenza aerodinamica basata sull'approccio dell' Energized Wake Area. Rel. Gaetano Iuso. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Samuele Graziani. Sensitivity analysis for sonic boom phenomena for different type of supersonic aircraft. Rel. Nicole Viola, Roberta Fusaro. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Giovanni Grimaldi. Development of a conceptual design tool to predict performance and pollutant and GHG emissions of high-speed vehicles using liquid hydrogen. Rel. Nicole Viola, Roberta Fusaro. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Gabriel Jose' Gutierrez. Design of the ESA PROBA-3 Alternative SPS algorithm for formation flight applications. Rel. Elisa Capello, Maurizio Pancrazzi. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Davide Iannotta. Strategia Multi-Fidelity applicata alla CFD di un flusso transonico attorno a un profilo alare supercritico = Application of a Multi-Fidelity strategy to CFD simulations of a transonic flow around a supercritical airfoil. Rel. Sandra Pieraccini. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Domenico Andrea Iannotta. Analisi ``global/local" di strutture spaziali dispiegabili in materiale composito = Analysis of deployable space structures in composite material through a ``global/local" approach. Rel. Alfonso Pagani, Alberto Racionero Sanchez-Majano, Erasmo Carrera. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Mauro Iavarone. Sviluppo di un modello dinamico per un velivolo flessibile = Development of a dynamic model for a flexible aircraft. Rel. Angelo Lerro, Piero Gili. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Pasquale Iavecchia. Progettazione preliminare di un UAV idrovolante a fuel cell per ripercorrere le trasvolate dell' S55 = Preliminary design of a fuel cell seaplane UAV to retrace the flights of the S55. Rel. Enrico Cestino, Giulio Romeo. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Giuseppe Francesco Impicciatore. Implementazione di sensori FBG per il monitoraggio strutturale di un velivolo sperimentale = Implementation of FBG sensors for structural monitoring of a prototype aircraft. Rel. Paolo Maggiore, Matteo Davide Lorenzo Dalla Vedova, Pier Carlo Berri, Gaetano Quattrocchi. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Simone Inguglia. Determinazione dell'assetto longitudinale e delle forze agenti su un'imbarcazione a vela mediante analisi CFD = CFD analysis of a sailing boat: calculation of longitudinal attitude and acting forces. Rel. Domenic D'Ambrosio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Angelo Intile. Validazione numerica e sperimentale di un metodo per lo shape-sensing di travi in parete sottile = Numerical and experimental validation of a method for shape-sensing of thin-walled beams. Rel. Marco Gherlone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Sabato Iuliano. An electric motorized dispenser for In-Orbit Servicing. Rel. Manuela Battipede, Luigi Mascolo. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Emilio Ivaldi. Stima preliminare del propellente necessario per missioni di rendez-vous con Near-Earth asteroids = Preliminary required propellant estimation for rendez-vous missions towards Near-Earth asteroids. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Pavel Kirdoun. Ottimizzazione di traiettorie orbitali per Near-Earth Asteroids = Orbital trajectories optimization towards Near-Earth Asteroids. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Francesco Maria Labartino. Studio di fattibilità sull’utilizzo di un rotore eolico su Marte. Rel. Gaetano Iuso. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Lucia Lamanna. The A.I.T activities flow, in the System Engineering Process for a multi-application platform. Rel. Paolo Maggiore, Matteo Davide Lorenzo Dalla Vedova. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Edmondo Lanciotti. Study of innovative sensor configurations for evaluating of the loads acting on the aircraft structure. Rel. Paolo Maggiore, Matteo Davide Lorenzo Dalla Vedova, Pier Carlo Berri. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Roberto Landolina. Studio e sviluppo di un piccolo habitat lunare all'interno dei Lava Tubes basato sul modello ARTEMIS = Study and development of a small lunar habitat inside Moon Lava Tubes based on ARTEMIS model. Rel. Paolo Maggiore, Laura Mainini. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Edoardo Lapalombella. Development of an innovative FEM simulation methodology for composite structures based on orthotropic multi-modulus stress auto-adaptive materials. Rel. Marco Gherlone, Fulvio Romano, Francesco Di Caprio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Alberto Leo. Optimization of process parameters for DED of IN718 superalloys via Single scan track and single-layer analysis. Rel. Sara Biamino, Abdollah Saboori. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Ludovico Livrari. Escape maneuvers from Sun-Earth L2 Lagrangian Point with electric propulsion. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Flavio Lleshi. Validation of a XV-15 Tilt Rotor Aerodynamic Database. Rel. Giorgio Guglieri, Pierluigi Capone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Gabriele Luzzani. Study and design of an autotuning system for a helicopter flight simulator. Rel. Giorgio Guglieri, Pierangelo Masarati, Francesco Borgatelli. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Michele Neve Mabritto. Progetto di un velivolo a pilotaggio remoto con l’ausilio di tecnologie produttive e di propulsione innovative = Design of a remotely piloted aircraft using innovative manufacturing and propulsion technologies. Rel. Paolo Maggiore, Matteo Davide Lorenzo Dalla Vedova. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Marco Maffucci. Mobile networks for space telecommunications: 5G network on the lunar surface. Rel. Giorgio Guglieri, Stefano Primatesta, Gian Piero Fici. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Lorenzo Malagoli. Analisi CFD in Campo Automotive di Raffreddamento di Motore Elettrico = CFD Analysis of Electric Motor Cooling for Automotive Industry. Rel. Domenic D'Ambrosio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Federico Maldera. Uso di modelli finiti avanzati e algoritmi di intelligenza artificiale per l’individuazione del danno in strutture in materiale composito. Rel. Alfonso Pagani, Marco Enea, Erasmo Carrera. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Andrea Manavella. Validazione delle prestazioni di eliche a bassi numeri di Reynolds tramite analisi CFD e modelli di ordine ridotto = Low Reynolds number propeller performance validation by CFD analysis and reduced order models. Rel. Domenic D'Ambrosio, Manuel Carreno Ruiz. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Carlotta Manca. Swashplateless MAV: valutazione delle prestazioni attraverso l’analisi CFD e confronto con i test sperimentali su banco prova = Swashplateless MAV: performance evaluation through CFD analysis and comparison with experimental bench tests. Rel. Domenic D'Ambrosio, Dario Riccobono, Manuel Carreno Ruiz, Giorgio Guglieri. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Federica Manera. Retropropulsione supersonica per atterraggi su Marte: effetto del rapporto di espansione sul campo di moto = Supersonic retropropulsion for Mars landings: effect of the expansion ratio on the flowfield. Rel. Roberto Marsilio, Domenic D'Ambrosio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Mattia Manfredini. Studio ed ottimizzazione del processo di analisi metallografica: valutazione dello stato attuale e proposte di miglioramento tecnico ed economico = Study and optimization of the metallographic analysis process: evaluation of the current status and proposals for technical and economic improvement. Rel. Daniele Botto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Salvatore Manganaro. Numerical Simulations of Reacting Flows in Innovative Combustors. Rel. Michele Ferlauto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Gennaro Mangiacapra. Navigation and Control Algorithm Design on TSE(3) around Small Irregular Bodies. Rel. Elisa Capello, Morad Nazari. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Elia Mantelli. Pollutant emissions estimation from subsonic and hypersonic civil aircraft. Rel. Roberta Fusaro, Nicole Viola, Davide Ferretto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Mario Francois Marano. Modello cinetico a particella della dinamica del plasma all’interno di un propulsore spaziale di tipo air-breathing Hall thruster = Kinetic particle-based plasma model of air-breathing Hall thruster. Rel. Lorenzo Casalino, Olga De Pascale, Francesco Taccogna. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Domenico Savio Marchese Ragona. Electron Beam Melting of H13 tool steel; Optimization of process parameters. Rel. Sara Biamino, Abdollah Saboori, Cristian Ghibaudo. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Leonardo Marconi. Energy-Absorbing Origami Structure for Crashworthiness Design. Rel. Giacomo Frulla, Enrico Cestino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Giulia Maritano. Utilizzo dell'ottimizzazione topologica per la produzione di stampi per la laminazione dei materiali compositi = Use of topological optimization to produce molds for the lamination of composite materials. Rel. Enrico Cestino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Lorenzo Maritano. Studio delle Oscillazioni del Plasma e dei Modi Operativi in un Propulsore ad Effetto Hall = Study of Plasma Oscillations and Operational Modes in Hall Effect Thrusters. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Donato Martella. Analisi di traiettorie a bassa spinta per rimozione di detriti spaziali = Low thrust trajectories analysis for space debris removal. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Paolo Martire. A space-borne Doppler radar end-to-end simulator for the ESA WIVERN mission. Rel. Alessandro Battaglia, Fabrizio Stesina. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Francesco Mascia. Performance, Profitability and Efficiency of Regional Air Transport. Rel. Paolo Maggiore, Marco Gajetti. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Pietro Mascolo Vitale. Iterative and Neural Network Based Methods to Solve a Model-Free Scheme for Flow Angle Estimation. Rel. Angelo Lerro, Piero Gili. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Davide Masi. Modelli di ordine ridotto per un disco palettato di una turbina a gas = Reduced order model on bladed discs of gas turbine. Rel. Daniele Botto, Stefano Zucca. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Selena Mastrodonato. Rimozione di debris multipli in LEO: applicazione della teoria dei grafi ad un problema tempo - dipendente = Multiple debris removal in LEO: graph theory application on a time-dependent problem. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Marco Mattioli. Metriche di valutazione di strutture vorticose tridimensionali tramite due componenti di velocità e tecniche di ricostruzione della terza componente = Evaluation metrics of tridimensional vortical structures using two velocity components and third component reconstruction techniques. Rel. Gioacchino Cafiero, Michele Spinolo. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Alessandro Maturi. Geometrically Nonlinear Analysis of Axial Rotors. Rel. Erasmo Carrera, Matteo Filippi. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Andrea Umberto Mauro. Analisi aerotermica di palettaggi di turbina assiale = Aerothermal analysis of axial turbine bladings. Rel. Michele Ferlauto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Guido Mazza. Evaluating RANS capabilities to simulate lean blowout of a gaseous fuel flame in a model combustion chamber. Rel. Francesco Larocca, Ivan Zubrilin. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Lorenzo Medi. Sviluppo di un software per le analisi di giunzioni incollate in materiale composito: andamento tensionale e criterio di resistenza = A new software for composite bonded joint design: tensional trend and failure criteria. Rel. Marco Gherlone, Luca Goglio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Martina Membola. New Advance Civil Navigation's solutions to increase the compliance of military fighters A/C with civil aviation in future global airspace. Rel. Nicole Viola, Roberto Demarchi. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Simone Menditto. Dimensionamento preliminare del sistema di controllo termico attivo MPFL monofase di un generatore termoelettrico a radioisotopi per missioni lunari. Rel. Paolo Maggiore, Matteo Davide Lorenzo Dalla Vedova, Piero Messidoro. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Alessandro Mercurio. Design and Modeling of an Autonomous Parafoil for Rover Mars Landing. Rel. Elisa Capello, Mauro Mancini. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Angelo Miccoli. Studio numerico di un risonatore di Hartmann-Sprenger: effetto della presenza di un ostacolo interno sulle prestazioni del dispositivo = Numerical study of a Hartmann-Sprenger resonator: effect on the performance of an obstacle inside the cavity. Rel. Andrea Ferrero, Dario Giuseppe Pastrone, Filippo Masseni. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Raul Michelini. Optimization of sequences for space debris removal. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Matteo Milano. Studio di una metodologia per la valutazione del rischio aereo per Sistemi Aeromobili a Pilotaggio Remoto = Development of a risk assessment methodology to evaluate the air risk for Unmanned Aircraft Systems. Rel. Giorgio Guglieri, Stefano Primatesta. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Carlo Minerva. Development of solutions to evaluate some of the key factors for the optimal execution of aerospace bearings. Rel. Carlo Rosso, Nicolas Peyret, Thomas Lengagne. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Alessandro Minervini. Development of an Open-Source Flight Controller for Rotary Wing UAVs. Rel. Giorgio Guglieri, Simone Godio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Stefan Mirkovic. Analisi delle differenze amendments ICAO dei sistemi di sorveglianza e prevenzione delle collisioni delle telecomunicazioni aeronautiche = Analysis of ICAO amendments differences of surveillance and collision avoidance systems of aeronautical telecommunications. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Simone Moino. Methodology and tools for propulsive performance characterization of high-speed aircraft in conceptual design. Rel. Nicole Viola, Roberta Fusaro, Davide Ferretto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Davide Monni. Numerical simulating and analytical modelling the wake behind vertical axis wind turbines: a verification analysis. Rel. Gaetano Iuso, Carlos Simao Ferreira, Ming Huang. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Lorenzo Montagna. Ottimizzazione di traiettorie per missioni a flyby multipli con asteroidi Near-Earth = Trajectories optimization for multiple flybys missions with Near-Earth asteroids. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Greta Montaldo. Development of a modular system for payloads accommodation on spatial platforms. Rel. Nicole Viola, Rosa Sapone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Filippo Montanari. Solving methods for the Multi-item Inventory Routing Problem with Pickup and Delivery. Rel. Renzo Arina, Stefania Scarsoglio, Patrice Leclaire, Arthur Bit-Monnot. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Gianmarco Montedoro. Stima preliminare del consumo di propellente per missioni verso Near-Earth Asteroids = Preliminary estimation of propellant consumption for missions to Near-Earth Asteroids. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Alejandro Moreno Perez. Development of the Prototype of the Oil Heating Control System for the Lubrification System of a Mechanical Transmission Components Test Rig. Rel. Andrea Mura. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Pierangela Morga. Flexible Spacecraft Modelling and Control with a Robotic Manipulator. Rel. Elisa Capello, Mauro Mancini. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Francesco Mormile. Performance Requirements for a Descent and an Ascent Lunar Engine. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Gerardo Morrone. Simulazione FEM del processo RTM di materiali compositi: applicazione ad un case study = FEM simulation of the RTM process of composite materials: application to a case study. Rel. Massimiliana Carello, Alessandro Messana. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Davide Neglia. Design of Observer-based Navigation Algorithms for a CubeSat Space Mission. Rel. Elisa Capello, Hyeongjun Park. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Luca Nepote Fus. Methodology and tools to improve the aerodynamic characterization of high-speed vehicles during the conceptual design phase. Rel. Nicole Viola, Roberta Fusaro, Davide Ferretto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Alessandro Neri. Tecniche di Manifattura Additiva per Strutture Composite con Fibre Curvilinee = Additive Manufacturing of Composite Structure with Curved Fibers. Rel. Enrico Zappino, Matteo Filippi, Erasmo Carrera. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Daniele Nigro. Characterization of Inconel 625/TiC composite fabricated by Laser Powder Bed Fusion. Rel. Sara Biamino, Giulio Marchese. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Daniele Obertino. Design and Simulation Study of a Hybrid Electric Propulsion System for a VTOL Tilt-Rotor UAV =. Rel. Dario Giuseppe Pastrone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Edoardo Orazi. Calibrazione di un metodo DLM per la valutazione di forze aerodinamiche instazionarie = Calibration of a DLM method to calculate unsteady aerodynamic forces. Rel. Michele Ferlauto, Emanuele Bottone, Vincenzo Vaccaro. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Federico Orlacchio. Impatto dell'incrudimento termico sulla precipitazione delle fasi indurenti in una lega modello di alluminio prodotta tramite SLM = Impact of thermal work hardening on the precipitation of hardening phases in a model aluminium alloy produced by SLM. Rel. Sara Biamino, Louise Toualbi, Yann Le Bouar. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Luca Pace. Development of a telecommunication payload for light stratospheric platforms. Rel. Giorgio Guglieri, Victor Miherea, Gabriele Sartor. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Mario Paggiarino. Mission Analysis of a CubeSat for Hyperspectral Remote Sensing in Low Earth Orbit. Rel. Manuela Battipede, Luigi Mascolo. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Andrea Palmarini. Electromagnetic Wiping System for Hot-Dip Coating. Rel. Sandra Pieraccini, Miguel Alfonso Mendez, Fabio Pino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Carlo Loris Palombo. Development and validation of an improved wall-function boundary condition for computational aerodynamics. Rel. Domenic D'Ambrosio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Sergio Pansini. Risk assessment of an On Orbit Servicing mission based on space tug concept. Rel. Nicole Viola, Christopher Andrea Paissoni. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Manuela Maria Pantano. Thruster layout in spacecraft with tight control requirements – optimization models and analysis. Rel. Manuela Battipede, Giorgio Fasano. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Giulio Panzarasa. Experimental Study of a Resonance Igniter for Rocket Engines. Rel. Dario Giuseppe Pastrone, Andrea Ferrero, Filippo Masseni. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Luca Pascarella. Studio di trattamenti termici per il detensionamento di parti prodotte in Inconel 625 via Laser Powder Bed Fusion = Study of heat treatments of stress relieving for parts made of Inconel 625 produced by Laser Powder Bed Fusion. Rel. Sara Biamino, Giulio Marchese, Alessandro Salmi. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Matteo Pastuglia. Analisi delle caratteristiche idrodinamiche di tavole da surf attraverso strumenti di fluidodinamica computazionale = Analysis of the hydrodynamic characteristics of surfboards through computational fluid dynamics tools. Rel. Domenic D'Ambrosio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Marco Patruno. Simulazione dell’iniezione di un flusso secondario in una corrente supersonica mediante DNS = Secondary flow injection in a supersonic stream direct numerical simulation (DNS). Rel. Andrea Ferrero, Roberto Marsilio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Matteo Paviolo. Materiali per l’Additive Manufacturing: caratteristiche e procedure certificative per l’aerospazio = Materials for Additive Manufacturing: characteristics and certification procedure for aerospace. Rel. Giacomo Frulla, Matteo Vazzola. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Andrea Pennisi. Analisi di traiettorie di escape da punti Lagrangiani = Analysis of escape trajectories from Lagrangian points. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Orlando Pepe. Banco di prova per comandi di volo: modellazione non lineare, simulazione e design of experiment per condizioni di altro attrito. Rel. Massimo Sorli, Giovanni Jacazio, Andrea De Martin. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Aleksandar Petkov. M-346 Simulator Model: development of the mathematical model of the flight dynamics. Rel. Manuela Battipede, Giuseppe Didiano. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Antonio Petronelli. Particle-In-Cell Simulation Of Heavy Species In Hall Thruster Discharge. Rel. Lorenzo Casalino, Mario Panelli, Francesco Battista. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Lorenzo Petrozzino. Development of an aircraft model for training flight simulation. Rel. Giorgio Guglieri, Luigi Mascolo. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Giovanni Piccione. Modeling and Control of a Space Drone for Mars Exploration Mission. Rel. Elisa Capello, Mauro Mancini. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Grazia Piccirillo. LTO noise prediction methodology for SST aircraft conceptual design. Rel. Nicole Viola, Roberta Fusaro. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Alessio Piccolo. Preliminary design of deployable Martian habitat made by innovative material. Rel. Giacomo Frulla, Enrico Cestino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Alfonso Picerno. Rendezvous maneuvres of small satellites equipped with miniaturized propulsion systems. Rel. Sabrina Corpino, Fabrizio Stesina. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Filippo Pilato. Progettazione della campagna sperimentale in onda estrema per il dispositivo PeWEC = Design of the experimental extreme wave campaign for the Pewec device. Rel. Giuliana Mattiazzo, Giovanni Bracco. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Martina Pippa. Study of the as-built and post-processed Inconel 939 alloy produced by laser powder bed fusion. Rel. Giulio Marchese, Sara Biamino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Vittorio Pistone. Design of a robust nonlinear attitude estimation algorithm for Space Rider mission. Rel. Elisa Capello, Marco Giannini. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Andrea Pittari. Analysis of the energy storage and thermal control subsystems of the Mars Science Laboratory rover. Rel. Paolo Maggiore, Matteo Davide Lorenzo Dalla Vedova. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Sofia Polimeni. Sede di un cuscinetto di potenza elicotteristico: confronto di diverse tecniche di modellazione FEM = Housing of a power rolling bearing for helicopters: a comparison of different FE modeling techniques. Rel. Stefano Zucca, Roberto Simonetta, Alessandro Nava. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Giovanni Polizzi. Adattamento griglie CFD attraverso il metodo delle variabili aggiunte: Produzione di un codice per il post-processing e l'adattamento = CFD grids adaptation through adjoint variables method: Production of a post-processing and adaptation code. Rel. Francesco Larocca, Andrea Ferrero. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Leonardo Pollini. Sonoluminescence and near self-similar spherically symmetric solutions of Navier-Stokes and Euler equations. Rel. Daniela Tordella. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Savino Pontino. Analisi RANS bidimensionale e tridimensionale per la palettatura di una turbina aeronautica = Two-dimensional and three-dimensional RANS analysis for the blading of an aeronautical turbine. Rel. Francesco Larocca, Andrea Ferrero. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Alessandro Princi. Deep learning techniques for micro-launchers branching trajectories optimization. Rel. Nicole Viola. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Matteo Pronunzio. Risposta forzata di un disco palettato di turbina con mid-span damper = Forced response of a turbine bladed disk with mid-span damper. Rel. Stefano Zucca, Erhan Ferhatoglu. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Damiano Pronzato. Il Management System nel contesto di un Operatore Aereo Commerciale = The Management System in the context of a Commercial Air Operator. Rel. Salvatore Brischetto, Paolo Maggiore, Enrico Foresto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Marina Quaranta. INCLUDING CAMERA-BASED MEASUREMENTS IN FREQUENCY-BASED SUBSTRUCTURING. Rel. Stefano Zucca, Daniel J. Rixen, Ahmed El Mahmoudi. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Ivana Querques. Prognostics of on-board electromechanical actuators: Bio-Inspired Metaheuristic Algorithms. Rel. Matteo Davide Lorenzo Dalla Vedova, Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Greta Raina. Numerical analysis of the mixing losses in a 1.5 stage turbine. Rel. Roberto Marsilio, Luigi Vigevano, Nicolas Binder. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Enrico Rastoldo. Calcolo della risposta forzata non lineare di dischi palettati di turbine di bassa pressione = Calculation of the non-linear forced response of a low pressure turbine blade. Rel. Stefano Zucca. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Henrique Rego Costa. Solar Electric Propulsion Transfers Optimization: Application to The Comet Interceptor Mission Transfer. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Lucas David Jeremie Remond. Evaluation and trade-off of aircraft variants with FAST-OAD-GA. Rel. Giacomo Frulla. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Mario Rizzi. Design preliminare di un longherone arrotolabile in materiale innovativo per pannelli solari flessibili con applicazione spaziale = Preliminary design of a rollable longeron in innovative material for flexible solar arrays in space application. Rel. Enrico Cestino, Giacomo Frulla, Nicola Giulietti. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Michele Romanelli. Modeling of water infiltration into the HVAC airbox of an automobile through the windshield wiper shafts. Rel. Renzo Arina, Vincent Herbert, Christophe Corre. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Marco Rossetti. Modellazione di attuatori per superfici di controllo Dimensionamento di meccanismi di attuazione innovativi per progetto di aeromobile di linea con ala a scatola = Control surfaces actuators design Dimensioning of innovative actuations systems for a box-wing liner concept. Rel. Erasmo Carrera, Marco Petrolo, Vittorio Cipolla. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Jacopo Rossi Ferrini. Development of CFD simulation methods to resolve acoustic characteristics of flow. Rel. Renzo Arina. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Leonardo Ruiu. Numerical analysis of a water Loss-Of-Coolant-Accident inside the EU DEMO Vacuum Vessel. Rel. Antonio Froio, Andrea Zappatore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Antoniovito Russo. Studio numerico del campo di flusso interno ad un Rampressor = Numerical study of the flow field inside a Rampressor. Rel. Michele Ferlauto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Luigi Russo. Analysis of an Aeronautical Database and Correlation with Single Pilot Operations. Rel. Giorgio Guglieri, Teodor Roci, Beatrice Conti. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Riccardo Salgarella. Innovative structures for vibration control. Rel. Erasmo Carrera, Alfonso Pagani, Daniel Giusa, Matteo Filippi. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Riccardo Salis. Experimental characterization of the turbulent boundary layer over a flat plate. Rel. Renzo Arina, Domenic D'Ambrosio, Christophe Schram, Riccardo Zamponi. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Giovanni Sanna. Neural Network Based Algorithm for Multi-UAV Coverage Path Planning. Rel. Giorgio Guglieri, Simone Godio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Mario Sansone. Shape Memory Alloy torsional actuators for aerospace applications: a preliminary design procedure. Rel. Enrico Cestino, Salvatore Ameduri, Antonio Concilio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Luigia Rachele Santaniello. No Hazard approach for the certification of commercial parts on EASA aircraft. Rel. Paolo Maggiore, Matteo Vazzola, Manuela Battipede. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Pasquale Saracino. Disposal Analysis Procedure Handbook and Analysis Tool Development - Use Case: Aircraft Environmental Control System. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Mauro Sardone. Riduzione di resistenza mediante microrugosità superficiale: Analisi wavelet di segnali anemometrici a filo caldo = Drug reduction by surface microroughness: Wavelet analysis of hot wire anemometric signals. Rel. Gaetano Iuso, Gioacchino Cafiero. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Michele Pio Savino. Development of a Nonlinear Optimization Solver for Space Flight Dynamics Applications. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Antonio Scalise. Evaluation of lighting condition for SROC docking at Space Rider. Rel. Sabrina Corpino, Guglielmo Daddi. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Daniele Scano. Uso di Polinomi di Lagrange nell'Analisi Lineare e Nonlineare di Strutture Laminate. Rel. Erasmo Carrera, Alfonso Pagani, Riccardo Augello. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Matteo Scarsella. Orbite di parcheggio ottimali per missioni di andata e ritorno per Marte = Optimal parking orbits for return missions to Mars. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Lorenzo Schena. Implementation and Comparative Analysis of Machine Learning Methods for the closed-loop control of fluid flows. Rel. Sandra Pieraccini. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Beatrice Schiavone. Thruster layout optimized design – support algorithms and a real-world case study. Rel. Manuela Battipede, Giorgio Fasano. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Paolo Scuderi. A new Magneto-Fluid Dynamics model for Low Magnetic Reynolds number regime in the Hybridized Discontinuous Galerkin Framework. Rel. Domenic D'Ambrosio, Thierry Magin, Georg May. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Federico Scussat. Progettazione preliminare di un drona ad ala fissa per fotogrammetri aerea. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Alessia Serafini. Ottimizzazione dei parametri di progetto del terzo stadio a propellente ibrido di un lanciatore per piccoli satelliti = Optimisation of the design parameters of the third stage of a hybrid rocket engine of a launcher for small satellites. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Giovanni Sgarra. Integrazione del software Pacelab WEAVR con il simulatore di volo X-Plane per il training dei piloti in ambiente di realtà virtuale = Integration of Pacelab WEAVR software with X-Plane flight simulator for pilot training in virtual reality environment. Rel. Giorgio Guglieri, Stefano Primatesta, Angelo Gino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Andrea Sica. Procurement activities for the design of a 6U CubeSat for Earth Observation in LEO. Rel. Sabrina Corpino, Fabrizio Stesina. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Flavio Sivieri. Valutazione degli effetti ambientali sul trasporto di materiale biologico e farmaci tramite aeromobili a pilotaggio remoto. Rel. Enrico Cestino, Stefano Primatesta. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Martina Spadon. Effect of porosity on the wall-pressure fluctuations on a wing profile immersed in a turbulent flow. Rel. Renzo Arina, Domenic D'Ambrosio, Riccardo Zamponi, Christophe Schram. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Caterina Speranza. Study of the docking and collision avoidance manoeuvres for a CubeSat with a Mothercraft. Rel. Sabrina Corpino, Fabrizio Stesina. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Pietro Sperotto. A Meshless Method to Measure Pressure Fields from Image Velocimetry via Radial Basis Functions. Rel. Sandra Pieraccini. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Piergaspare Spinelli. Analisi dei flussi rarefatti tramite utilizzo del codice SPARTA = Analysis of rarefied flows through the use of SPARTA code. Rel. Andrea Ferrero, Domenic D'Ambrosio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Federica Spoto. Particle Image Velocimetry. Development of a Python Package for PIV-based velocity fields evaluation, via Radial Basis Functions =. Rel. Sandra Pieraccini, Miguel Alfonso Mendez. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Elia Starna. Use of Lattice Structures in Topological Optimization – Case Study: PLT-2 TIR Mission Space Telescope Frame. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Elisa Stasi. Satellite structural critical components static test and FEM model correlation. Rel. Marco Gherlone, Luigi Manfredi. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Lorenzo Strocchi. Analisi di un sistema propulsivo elettrico per mini piattaforme stratosferiche = Analysis of an electric propulsion system for stratospheric mini platforms. Rel. Paolo Guglielmi, Victor Miherea, Gabriele Sartor. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Francesca Suriano. Study of SLAM State of the Art Techniques for UAVs Navigation in Critical Environments. Rel. Giorgio Guglieri, Simone Godio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Fabio Tagliavia. Sviluppo preliminare di una metodologia per analisi aeroacustiche mediante software CONVERGE ™ = Preliminary development of a methodology for aeroacoustic analysis using CONVERGE ™ software. Rel. Renzo Arina. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Francesco Salvatore Tartaglia. Digitalizzazione di procedure operative in realtà virtuale per il training dei piloti tramite l'integrazione di Pacelab WEAVR con il simulatore di volo X-Plane = Digitalization of operational procedures in virtual reality for pilot training by integrating Pacelab WEAVR with the X-Plane flight simulator. Rel. Giorgio Guglieri, Stefano Primatesta, Angelo Gino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Daniele Tilloca. Hazards and Risk Analysis for Helicopter Aerial Work Mission Profiles. Rel. Giorgio Guglieri, Marco Gajetti. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Federica Toni. Interazione termica tra fluido e particelle sospese in flussi turbolenti = Fluid-particle thermal interaction in turbulent flows. Rel. Michele Iovieno. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Sabino Luca Toriaco. Design and virtual validation of the FSS Support made by Additive Manufacturing technique for space satellite platform applications. Rel. Salvatore Brischetto, Amedeo Giancarlo Tenore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Lorenzo Torrente. Controllo del vortice di estremità alare mediante getti sintetici = Wingtip vortices control through synthetic jets. Rel. Gioacchino Cafiero, Gaetano Iuso. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Fatjon Tosku. Studio numerico di flussi separati in ugelli propulsivi = Numerical study of separated flow in propulsive nozzles. Rel. Francesco Larocca, Andrea Ferrero. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Maria Maddalena Trabace. Enabling technologies for multi-application Satellite: Alignment Campaign Definition. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Mario Trapanese. Progettazione di un attenuatore d'impatto per vetture da Formula SAE con l'impiego di codici FEM = Impact attenuator design for a Formula SAE car using FEM code. Rel. Marco Gherlone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Stanislao Trofa. Applicazione della vibrometria laser nelle prove di vibrazione a terra di un velivolo in materiale composito = Application of laser vibrometry in ground vibration tests of a composite aircraft. Rel. Enrico Cestino, Giacomo Frulla, Valentina Martilla, Vito Sapienza, Lorenzo Chesta. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Enza Incoronata Trombetta. Identification Methods and Simulation Modeling of a small UGV for Indoor Applications. Rel. Elisa Capello, Davide Carminati, Iris David Du Mutel De Pierrepont F. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Antonino Tudisca. Implementation and investigation of subgrid-scale models in particle-laden flows. Rel. Francesco Larocca, Stephan Staudacher, Patrick Kopper, Anna Schwarz. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Alberto Tumbiolo. Development and implementation of algorithms for the design and installation of avionics systems for commercial aircraft in an MDO framework. Rel. Sabrina Corpino, Marco Fioriti. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Filippo Valoriani. Metodologie di monitoraggio in tempo reale delle strutture aeronautiche. Shape sensing per un velivolo UAV = Real-time monitoring methodologies for aeronautical structures. Shape sensing for a UAV aircraft. Rel. Marco Gherlone, Massimiliano Corrado Mattone, Daniele Camatti, Marco Esposito. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Francesco Valvano. Progettazione e Analisi Termo-Strutturale di un Freno a Disco Innovativo = Design and Thermo-Structural Analysis of an Innovative Disc Brake. Rel. Marco Gherlone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Damiano Vangieri. Comportamento presa in regime supersonico. Rel. Francesco Larocca, Andrea Ferrero. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Fabio Vasta. Caratterizzazione di campioni di Inconel 718 prodotti mediante Directed Energy Deposition = Characterization of Inconel 718 samples produced by Directed Energy Deposition. Rel. Giulio Marchese, Sara Biamino, Erica Librera. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Carmine Dario Vastola. Arbitration of tactile cueing functions for active inceptors systems. Rel. Giorgio Guglieri, Constantin Dullo. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Noemi Ventafridda. Study of a 6U CubeSat-Deployer system through FEM analysis and Environmental Tests. Rel. Marco Gherlone, Giuseppe Martinotti. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Karl Verholle. ANALISI STATICA E VIBRAZIONI LIBERE PER PANNELLI SANDWICH CON CUORE REALIZZATO MEDIANTE STRUTTURE LATTICE = STATIC ANALYSIS AND FREE VIBRATIONS FOR SANDWICH PANELS WITH CORE MADE BY LATTICE STRUCTURES. Rel. Salvatore Brischetto, Francesco Tornabene. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Federico Veronese. Integration of a Tilt-Rotor Flight Simulation Platform. Rel. Giorgio Guglieri, Federico Barra. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Andrea Verri. Low-Thrust Many-Revolutions maneuver optimization for future active debris removal applications. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Emanuele Vinella. Ottimizzazione di traiettorie per missioni verso asteroidi = Trajectories optimization for asteroid missions. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Luca Viscardi. Analisi aeroelastica e controllo di strutture portanti mediante modelli FEM e a parametri discreti = Aeroelastic analysis and control of lifting structrures through FEM and discrete parameters models. Rel. Erasmo Carrera, Marco Petrolo, Alfonso Pagani, Rodolfo Azzara. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Silvia Visnadi. Enhancement of a statistical life-cycle cost model for aero engines with support of service data analysis. Rel. Dario Giuseppe Pastrone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Gabriele Vittori. Development of a Mission Analysis Tool for Autonomous Space Carrier. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Luigi Vurro. Exploration of a Jovian Trojan Asteroid. Rel. Manuela Battipede. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Dario Yarallahy. Simulazione numerica della retro-propulsione supersonica: effetti della griglia e delle condizioni al contorn = Numerical simulation of supersonic retro-propulsion: grid and boundary conditions effects. Rel. Domenic D'Ambrosio, Roberto Marsilio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Alberto Za. Conceptual Design of a Reusable TSTO: Guess Data estimation and Matching Analysis. Rel. Nicole Viola, Roberta Fusaro, Davide Ferretto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Valerio Zaffora. Pianificazione di missione e analisi di prestazione per un Sistema Aeromobile a Pilotaggio Remoto per applicazioni agricole = Mission planning and performance analysis for an Unmanned Aircraft System for agricultural applications. Rel. Giorgio Guglieri, Nicoletta Bloise. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Paolo Zampollo. Design of an innovative cooled firing plate for M10 rocket engine with CFD verification. Rel. Dario Giuseppe Pastrone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
• Tommaso Zanatta. Design of a small quadrotor UAV and modeling of an MPC-based simulator. Rel. Elisa Capello. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Domenico Zaza. On modified Navier-Stokes equations for viscous non-Newtonian incompressible fluid motion and their numerical solution. Rel. Michele Iovieno. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Enrico Edoardo Zini. Precise orbit determination techniques for a lunar satellite navigation system. Rel. Fabio Dovis, Cosimo Stallo, Nicola Angelo Rana, Carmine Di Lauro. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Simone Zocca. Analisi del comportamento dinamico non-lineare di ruote dentate = Analysis of the dynamic non-linear behaviour of spur gears. Rel. Stefano Zucca. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview
• Andrea Zoli. Analisi e simulazione numerica di veicoli a propulsione umana = Numerical analysis and simulation of human powered vehicles. Rel. Cristiana Delprete, Paolo Baldissera. Politecnico di Torino, Master of science program in Aerospace Engineering, 2021
  

  

  Preview