A

• Matteo Allocco. Multiphase simulations for vehicle external water management. Rel. Michele Iovieno, Laura Maria Lorefice. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Marco Altomare. Numerical evaluation of the fluid dynamic forces acting over an Aortic aneurysm. Rel. Domenic D'Ambrosio, Florian Bernard. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Riccardo Andrighetto. Dynamic and thermal model for hydraulic shock absorbers. Rel. Domenic D'Ambrosio, Roberto Marsilio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Vincenzo Anzivino. Model based design for electric vehicles thermal management. Rel. Massimiliana Carello, Alessandro Ferraris. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Alessandro Luigi Aresta. Optical downlink study for Low Earth Orbit satellite. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Carlo Artero. Topology Optimization of Aeronautical Gears. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Salvatore Asaro. Optimization of a low pressure compressor stage. Rel. Francesco Larocca. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Rodolfo Azzara. Analisi e progetto di carrelli, lander e fasi di docking con metodi multibody = Analysis and design of landing gear, lander and docking phases with multibody methods. Rel. Erasmo Carrera, Riccardo Augello. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview

B

• Laura Babetto. Reliability and Safety Assessment of a Thermal Control System of an Hypersonic Transportation Vehicle. Rel. Nicole Viola, Roberta Fusaro, Davide Ferretto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Luigi Balestra. Support to standards management for the CTO Office. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Davide Barbero. Surrogate Modelling of Aero-Engine Intake Design Space. Rel. Dario Giuseppe Pastrone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Umberto Barbieri. Model And Test Effectiveness Data Base (MATED) for Space program, Improvement by Re-Entry Vehicle case. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Federico Barra. Sviluppo di un modello di convertiplano per la simulazione del volo in real-time = Development of a tilt-rotor model for real-time flight simulation. Rel. Giorgio Guglieri, Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Mattia Bassignana. Design and characterization of a fast-response temperature probe. Rel. Gaetano Maria Di Cicca, Michele Iovieno, Marco Belan. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Beatrice Battisti. Modelling of the upstream propagation of coastal surface waves into open channels - Application to the dynamics of undulating bores. Rel. Daniela Tordella. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Tommaso Battocchio. Resistenza a fatica della sede attacco pala nel disco di turbin = Strength of blade-disk attachment in aero engine turbine. Rel. Daniele Botto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Sean Bazzocchi. UAV Flight Dynamics: Design and Development of a Framework for Flight Data Processing and Analysis. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Alessandro Benetton. Design for Lagrangian Point Trajectories. A complete force model approach. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Carlo Bianco. Heat Transfer Analysis and Performance Verification of a small-sized LRE. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Davide Bisio. Individuazione e riparazione di difetti tramite controlli non distruttivi e saldatura TIG su componenti in AlSi10Mg prodotti mediante Selective Laser Melting = Detection and reparing of defects by NDI and GTAW on AlSi10Mg parts made by Selective Laser Melting. Rel. Giulio Romeo. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Andrea Bongiovanni. Time-periodic sensitivity analysis methods for chaotic systems. Rel. Gaetano Iuso. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Davide Bongiovanni. "Resistenza a fatica in campo LCF della sede attacco pala sul disco di turbina a temperatura ambiente e ad alte temperature" = "Fatigue strength in LCF field of the turbine blade attachment at room temperature and at high temperatures". Rel. Daniele Botto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Veronica Borriero. Synthesis of reference guidance strategy based on re-entry corridor. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Sebastiano Bugno. Evasion maneuvers with double lunar flyby for interplanetary missions. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview

C

• Lidia Cancarini. How a dedicated refueling system can support a high-power electric spacecraft for Moon-Mars cargo transfers. Rel. Nicole Viola, Martina Mammarella, Christopher Andrea Paissoni. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Giancarlo Candiano. Fiber Bragg Grating Sensors for Mechanical and Thermal Prognostics and Diagnostics for Aerospace Applications. Rel. Paolo Maggiore, Matteo Davide Lorenzo Dalla Vedova, Davide Luca Janner, Daniel Milanese. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Giorgio Capovilla. Development of a ultrathin reaction wheel for modular nanosatellites. Rel. Leonardo Reyneri, Giulio Romeo. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Davide Carabellese. Progettazione degli algoritmi per il controllo dell'assetto di uno spinning CubeSat con attuatori magnetici = Design of attitude control algorithms for a spinning CubeSat using magnetorquers. Rel. Sabrina Corpino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Philip Carbone. Progettazione e modellazione parametrica di riduttori meccanici = Parametric design and modeling of mechanical gearboxes. Rel. Carlo Rosso. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Michele Carlino. Analisi prestazioni turbopompe per applicazioni spaziali = Turbopumps performance analysis for space applications. Rel. Dario Giuseppe Pastrone, Francesco Larocca. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Rocco Carlucci. Model And Test Effectiveness Data for Space program, Trace Gas Orbiter case. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Francesco Caruso. Studio dell’influenza dei trattamenti di post-processo sulla lega di Hastelloy X prodotta per laser powder bed fusion per applicazioni aerospaziali = Study of the influence of post-processing treatments on the Hastelloy X alloy produced by laser powder bed fusion for aerospace applications. Rel. Sara Biamino, Giulio Marchese. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Mariangela Casiello. Static and Dynamic Topology Optimization for Aeronautical Gears. Rel. Daniele Botto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Luca Casonato. INGLESE = Bio inspired smart materials applied to Spacecraft Thermal Control. Rel. Emma Paola Maria Virginia Angelini, Sabrina Grassini. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Stefano Cassone. Avamprogetto di una piattaforma multirotore versatile e a lunga autonomia = Conceptual design of a versatile and long-range multicopter. Rel. Paolo Maggiore, Matteo Davide Lorenzo Dalla Vedova. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Alessandro Rocco Catanzaro. Design and simulation analysis of Attitude and Determination Control System for the CubeSat 12U ATISE. Rel. Sabrina Corpino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Alessio Cataudella. Fuel cell test rig reconfiguration for a space energy provision system. Rel. Paolo Maggiore, Andrea Emanuele Maria Casini. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Simone Cesari. Rolling road simulations for drag coefficient prediction of aerodynamic enablers. Rel. Gaetano Iuso, Domenic D'Ambrosio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Daniele Champvillair. Numerical and experimental validation of an innovative anti-ice panel by means of computational fluid dynamics. Rel. Paolo Maggiore, Carlo Giovanni Ferro. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Juan Pablo Chevalie. Preliminary study for the design of a Ballbot. Rel. Stefano Mauro, Stefano Paolo Pastorelli, Matteo Melchiorre. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Lorenzo Chianchiano. Free Vibration Analysis of Rotating Functionally Graded Material Beams. Rel. Erasmo Carrera, Fiorenzo Fazzolari, Alfonso Pagani, Matteo Filippi. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Giuseppe Chiapparino. Aerodynamic Design Optimization of a Rotor Blade-Sleeve Section using a Surrogate-Based Approach. Rel. Renzo Arina. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Bogdan Chifan. Analisi aeroelastica preliminare dell'ala di un Long Range Global Strike UCAV = Preliminary Aeroelastic analysis of the wing of a Long Range Global Strike UCAV. Rel. Enrico Zappino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Giuseppe Cimmino. Investigation and Comparison of Hydrogen and Methane Explosive Characteristics. Rel. Dario Giuseppe Pastrone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Veronica Cinti. Analisi parametrica dello stato di tensione nell'attacco pala. Rel. Daniele Botto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Cosimo Ciraci'. Inverse heat conduction method and heat flux error estimation in rocket engines. Rel. Dario Giuseppe Pastrone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Christian Cirone. Previsioni prestazionali delle turbine aeronautiche di bassa pressione: l'impatto del design system = Impact of different design systems on Aeronautical LPT performance prediction. Rel. Francesco Larocca. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• David Codoni. DNS analysis of warm cloud microphysics and related mixing dynamic at the cloud-clear air interface. Rel. Daniela Tordella. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Simone Claudio Concas. Static Analysis of Low Pressure Turbine Stages: tool development. Rel. Christian Maria Firrone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Marco Convertini. Study of the influence of blades arrangement \\ on the mode shapes and stress scatter. Rel. Daniele Botto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Alessandro Coppo. Modellazione numerica a parametri concentrati di servo meccanismo elettro idrostatico per applicazioni prognostiche = Numerical model of electrohydrostatic actuator for prognostic analysis. Rel. Matteo Davide Lorenzo Dalla Vedova, Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Alessia Corradi. Il comportamento del sistema urea del veicolo in climi freddi: sviluppo di un metodo di calcolo mediante CFD = Urea system in automotive and its behaviour in cold weather: development of a calculation method with CFD. Rel. Domenic D'Ambrosio, Giacomo Frulla. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Filippo Corradino. Modeling of orbital and attitude dynamics of a satellite controlled via active electrostatic charging. Rel. Sabrina Corpino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Donato Corrado. Predisposizione ed utilizzo di un sistema di gestione configurazione ed avanzamento attività di approntamento di un velivolo strumentato per attività sperimentali: Gestione attività di sperimentazione in volo e a terra di prototipi = Predisposition and use of a system to manage the configuration and the advancement of an aircraft instrumented for experimental activities: Management of experimentation activity in flight and on the ground of prototypes. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Andrea Coscia. Sperimentazione di sensori innovativi per implementazione di tecniche prognostiche in campo aerospaziale = Testing of innovative sensors for the implementation of prognostic techniques for aerospace. Rel. Paolo Maggiore, Matteo Davide Lorenzo Dalla Vedova, Daniel Milanese, Davide Luca Janner. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Biagio Cotugno. Analysis of Electric Propulsion transfers for multiple debris removal. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Dionisio Cristallo. Model And Test Effectiveness Data Base (MATED) for Space program , Re-Entry Space Vehicle case. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Pietro Cruciani. Validation and further development of a tool for attitude perturbation analysis on satellites. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview

D

• Antonio D'Amato. Development of an Abel Transform Algorithm for Combustion Characterization and Data Analysis. Rel. Dario Giuseppe Pastrone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Giuseppe D'Amico. Acoustic Analysis of Passive Metamaterial panels using the finite element method and homogenized properties. Rel. Erasmo Carrera, Maria Cinefra, Matteo Filippi. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Lorenzo Dal Toso. Sistemi ad alto contenuto tecnologico su parti trasparenti per velivoli ad ala rotante = High technology system on glazing parts for helicopters. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Federico Dallari. Teoria delle reti complesse applicata al flusso turbolento in un canale piano: effetti del numero di Reynolds = Complex-network analysis of turbulent channel flow: effects of the Reynolds number. Rel. Stefania Scarsoglio, Luca Ridolfi, Giovanni Iacobello. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Renato Dalle Mura. Analisi agli elementi finiti di soluzioni strutturali per vacuum balloons = Finite element analysis of structural solutions for vacuum balloons. Rel. Marco Gherlone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Raffaele De Angelo. Investigazione aero-termica dei fenomeni di interazione tra flusso principale e secondario nelle turbine di bassa pressione = Aero-thermal investigation of main-secondary flow interaction phenomena in Low Pressure Aeronautical Turbines. Rel. Francesco Larocca. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Laura De Filippis. Implementation of a manoeuvres optimization prototype. Rel. Manuela Battipede. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Aurelio De Simone. Microscale Analysis of Fiber Reinforced Composite Materials. Rel. Erasmo Carrera, Marco Petrolo. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Matteo Devecchi. Modellizzazione e ottimizzazione di un processo d'integrazione di un'antenna su una nuova generazione di satellite NeoSat = Modeling and optimization of an integration process of an antenna on new satellite generation Neosat. Rel. Erasmo Carrera. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Savino Di Bitonto. Valutazione aerodinamica di robustezza del design di turbine aeronautiche = Aerodynamic assessment of design robustness of aeronautical turbines. Rel. Francesco Larocca. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Pasquale Difficile. Performance and Emission Imaging of a Coaxial Single Element GO2/GCH4 Rocket Combustion Chamber. Rel. Dario Giuseppe Pastrone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Francesca Donati. "An hybrid global optimisation strategy for designing variable stiffness composites". Rel. Erasmo Carrera, Marco Montemurro, Alfonso Pagani. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview

E

• Simone Elia. Design and development of a fluid system for a resonant igniter. Rel. Dario Giuseppe Pastrone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Daniele Esposito. Aerothermal analysis of vented disc brakes. Rel. Gaetano Iuso. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018

F

• Davide Fassio. Rumore aerodinamico di una lamina piana con bordo di fuga dentellato. Rel. Renzo Arina. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Jacopo Favarotto. Thermal analysis and fluidodynamic optimization of a battery cold plate for electric vehicle applications. Rel. Massimiliana Carello, Alessandro Ferraris. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Andrea Ferrante. Sviluppo di un tool per lo studio dinamico automatizzato relativo alle palette di turbine di bassa pressione = Development of a tool to perform automatic dynamic studies related to blade's low pressure turbines. Rel. Christian Maria Firrone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Flavia Ferrari. Impact of different subsystem architectures on aircraft engines in terms of Specific Fuel Consumption. Rel. Sabrina Corpino, Luca Boggero, Marco Fioriti. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Gabriele Ferrari. Application of a System Engineering approach to the preliminary design of cabin compartment alternatives for suborbital space transportation systems. Rel. Nicole Viola, Roberta Fusaro. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Michela Ferrero. Riduzione di resistenza d’attrito mediante tecnica riblets = Skin friction drag reduction by riblets. Rel. Gaetano Iuso. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Eleonora Fico. Simulation model for the Environmental Control System of a turboprop two-seater aircraft. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Adriano Finocchiaro. Hazards and Risks Analysis on Helicopters Offshore and Firefighting Mission Profile. Rel. Giorgio Guglieri, Marco Gajetti. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Michele Foggetta. Ground Control Software for Small Satellite Missions. Rel. Sabrina Corpino, Fabrizio Stesina. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Gianluca Francesconi. External aerodynamics optimisation using the Adjoint method. Rel. Domenic D'Ambrosio, Gaetano Iuso. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Calogero Maria Friscia. Traiettorie per velivoli con Collision Avoidance = Trajectories for aircraft with Collision Avoidance. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview

G

• Lorenzo Maria Gagliardini. Operations Automation on Sentinel-2. Rel. Sabrina Corpino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Andrea Garino. Sviluppo e testing di tool per analisi di sicurezza/affidabilità (Fault Tree Analysis). Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Simone Garino. Studio e analisi di fattibilità su metodo innovativo di produzione di propellente solido composito per propulsione a razzo = Study and feasibility analysis on an innovative production method for solid rocket composite propellant for rocket propulsion. Rel. Dario Giuseppe Pastrone, Marco Sangermano. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Daniel Garrone. Mars Sample Return. Rel. Giancarlo Genta. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Mattia Garulli. Experimental and Analytical Characterization of Injector Variation in Single Element Rocket Combustion Chambers. Rel. Dario Giuseppe Pastrone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Giuseppe Giammalva. Modeling of a Environmental Control System for single-engine aircraft. Rel. Paolo Maggiore, Matteo Davide Lorenzo Dalla Vedova. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Francesco Gianotto. Quasi-optimal low-thrust orbit transfers using simplified steering laws. Rel. Manuela Battipede. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Daniele Giardina. CERTIFICAZIONE DI UN TOOL PER FAULT TREE ANALYSIS. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Martina Giaveno. Analisi CFD di resistenza di un’imbarcazione da canottaggio = CFD Resistance Prediction of a rowing boat. Rel. Cristiana Delprete, Paolo Baldissera. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Federico Giuffrida Trampetta. Model Predictive Control techniques for fixed-wing UAV maneuvers. Rel. Elisa Capello, Martina Mammarella. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Marco Giuliani. Design, development and experimental characterization of a laboratory model for the Destiny+ Dust Analyzer (DDA). Rel. Sabrina Corpino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Andrea Gozzo. Sheltering factor recognition via machine learning for fully autonomous UAV urban path planning. Rel. Giorgio Guglieri. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Amedeo Grasso. Implementation of classical and advanced failure criteria for composite layered structures in FEMAP and assessment of results. Rel. Erasmo Carrera. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Jordy Grasso. MODELLING, PERFORMANCE ASSESSMENT AND AERODYNAMIC OPTIMISATION OF A SUPERSONIC THROUGH-FLOW ROTOR. Rel. Dario Giuseppe Pastrone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Filippo Grisot. Manovre a bassa spinta per ampi cambi di inclinazione e RAAN in LEO = Low thrust manoeuvres to perform large changes of RAAN or Inclination in LEO. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Matias Gualtieri Lara. Sensorless Brushless DC Motors. Development and comparison of different fault tolerant control algorithms. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Lorenzo Gugliotta. Analisi multidisciplinare del modello di perdita delle rotor tip clearance = Multidisciplinary analysis of Rotor Tip Clearance Loss modelling. Rel. Francesco Larocca. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Raffaele Guido. Blade Profile Loss Model development for Axial-Flow Fans and Compressors performance prediction using Through-Flow Simulations. Rel. Lorenzo Casalino, Filippo Maggi. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview

I

• Almerico Iacono. Development of a Code for Aeroelastic Optimization of Wings with Stress Constraints Aggregation. Rel. Enrico Cestino, Giacomo Frulla, Joseph Morlier. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Irma Isnardi. Nonlinear dynamics and control of an aeroservoelastic system. Rel. Giacomo Frulla. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview

K

• Florian Kokoshi. Alternative Gas Turbine Architecture for Middle-of-Market Engines. Rel. Dario Giuseppe Pastrone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Artem Kolisnichenko. Full-PIC Simulation of Ion Thruster Plume and Thrust Vectoring Devices. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview

L

• Emanuele La Brocca. Progetto di Sistemi per un Long Range Global Strike UCAV = Systems Design for a Long Range Global Strike UCAV. Rel. Marco Fioriti, Nicole Viola, Luca Boggero. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Pietro La Mantia. Modellazione surrogata multi-fedeltà per piastre danneggiate in materiale composito = Multifidelity surrogate modeling for damaged composite panels. Rel. Marco Gherlone, Laura Mainini. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Andrea Lacagnina. Ottimizzazione del processo Direct Energy Deposition dell'acciaio AISI 316L: tipo di polveri e parametri relativi ai gas = Optimization of the Direct Energy Deposition process of AISI 316L steel: type of powders and parameters related to gases. Rel. Sara Biamino, Abdollah Saboori, Federico Bosio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Graziano Laera. Emission Imaging of a Coaxial Single Element GOX/GH2 Rocket Combustion Chamber. Rel. Dario Giuseppe Pastrone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Marco Lanza. How the Cislunar Station can support refueling of a high-power electric spacecraft for Moon-Mars cargo transfers. Rel. Nicole Viola, Martina Mammarella, Christopher Andrea Paissoni. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Luca Lorusso. GPS-based trajectory tracking technique for an unmanned hexacopter in fire-detection missions. Rel. Manuela Battipede. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Matteo Loss. Implementation of level set methods for moving interfaces on adaptive grids. Rel. Francesco Larocca, Sergio Ricci. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Damaso Luque Arias. Pitch Control Unit redesign for additive manufacturing. Rel. Carlo Rosso. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview

M

• Luigi Maddaluno. Two-dimensional Aorta's outflow boundary condition computed using 2-elements Windkessel model. Rel. Domenic D'Ambrosio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Marco Magazzu'. Analisi spettrale di un flusso di cavità = Cavity flow spectral analysis. Rel. Gaetano Maria Di Cicca. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Michele Magnetta. Micromechanics analysis of fiber-reinforced composites. Rel. Erasmo Carrera, Marco Petrolo. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Marco Malvindi. Aerodynamic design of a blisk fan: multidisciplinary optimization by aero-mechanical iterations. Rel. Francesco Larocca. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Francesca Mancarella. Proper Orthogonal Decomposition applicata all'Aeroelasticità = Proper Orthogonal Decomposition in Aeroelasticity. Rel. Renzo Arina. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Paolo Mancini. Sviluppo ed implementazione di una metodologia per il dimensionamento preliminare del sistema di controllo del volo di velivoli ipersonici = Methodology and tool development to support the preliminary design of the Flight Control System of hypersonic vehicles. Rel. Nicole Viola, Roberta Fusaro, Davide Ferretto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Raffaele Manna. Non-destructive Inspection of Weak Bonds in Composite Joints. Rel. Giulio Romeo. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Alessandro Marcato. Aerodynamic study of a racing car. Rel. Gaetano Iuso. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Alessandro Marin. Ottimizzazione di missioni spaziali ADR mediante algoritmi genetici. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Luca Marre' Brunenghi. Variational Germano Method for Nonlinear Subscale Models. Rel. Domenic D'Ambrosio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Davide Martella. Study of Innovative Architectures for Agile Earth Observation Satellites. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Manfredo Martinino. System Engineering for an Earth observation satellite. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Luigi Mascolo. Electro-Magnetic Launchers at the Lunar South Pole. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Francesco Mazza. Numerical assessment of the plasma properties in an Inertial Electrostatic Confinement device. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Gianluca Mazzella. Robust Design di un Endoreattore a propellenti ibridi in presenza di Erosione della gola nell'ugello = Robust Design of Hybrid Rocket Engine in the presence of throat erosion. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Lorenzo Micali. Caratterizzazione delle proprietà meccaniche di compositi rinforzati in fibra di carbonio stampati in 3D = Characterization of mechanical properties of 3D printed continuous carbon fiber reinforced composites. Rel. Erasmo Carrera, Alfonso Pagani, Enrico Zappino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Victor Miherea. Sviluppo di un sistema di rientro con controllo di traiettoria per palloni sonda = Development of a Parafoil-based recovery system for stratospheric balloon missions. Rel. Giorgio Guglieri. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Claudia Mingarelli. Ripartizione ottimale della potenza tra propulsori elettrici per missioni interplanetarie = Optimal distribution of power among electric thrusters for interplanetary missions. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Elio Miscio. Development of atmosphere and altimeter models for Mars mission simulation and integration in dSPACE real-time environment. Rel. Giorgio Guglieri, Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Daniele Modesti. Progetto preliminare di una piattaforma UAS a configurazione VTOL. = Preliminary design of a UAS platform with VTOL configuration. Rel. Paolo Maggiore, Matteo Davide Lorenzo Dalla Vedova. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Stefania Mura. High level analysis to support preliminary design of hypersonic vehicle. Rel. Nicole Viola, Roberta Fusaro. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview

N

• Andrea Novelli. Lunar gravity assisted escape trajectories towards Near Earth Asteroids. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Alessandro Novero. Analisi ed ottimizzazione di orbite di parcheggio per una missione di sample return su Marte = Analysis and optimization of parking orbits for a Mars Sample Return Mission. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Cristina Nuzzo. Aerodynamic Analysis of a Transonic Blended Wing Body Concept. Rel. Giulio Romeo. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview

O

• Carmen Oltra Ferrero Fayos. A scientific method for risk analysis of helicopter aerial work accidents. Rel. Giorgio Guglieri, Marco Gajetti. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018

P

• Francesco Palazzo. Multiple-input active aeroelastic control using the receptance method on a flexible wing. Rel. Alfonso Pagani. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Marco Palli. Cabin Escape System: critical subsystems identification and separation subsystem design. Rel. Nicole Viola, Roberta Fusaro. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Salvatore Papadopoli. Aerothermal postflight analysis of the Intermediate eXperimental Vehicle (IXV). Rel. Domenic D'Ambrosio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Matteo Perello. Numerical simulation and experimental validation of lattice structures for an innovative anti-ice leading edge. Rel. Paolo Maggiore, Carlo Giovanni Ferro. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Michele Petiti. Uso di tecniche di stampa 3D con fibre di carbonio per il rinforzo di piastre forate = Use of 3D printing with fiber placement capabilities for the reinforcements of plates with circular hole. Rel. Erasmo Carrera, Enrico Zappino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Stefano Pezzano. Aeroelastic Modelling of a Wind Turbine Blade. Rel. Domenic D'Ambrosio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Chiara Picco. Preparations, simulation and testing of remote Rover operations for a Martian robotic mission. Rel. Nicole Viola. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Margherita Pincini. Analysis of Cost drivers impact on Direct Operating Costs estimation of a hypersonic point-to-point vehicle. Rel. Nicole Viola, Davide Ferretto, Roberta Fusaro, Valeria Vercella. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Orazio Pinti. FloBoS - A Time Domain Floating Bodies Simulator. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Bruna Pisano. Numerical investigation of Vortex Shedding effect in SRM using advanced turbulence modeling: confi guration with radial injected flow in combustion chamber. Rel. Giulio Romeo, Francesco Larocca. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Xhonatan Polisi. Studio del processo normativo di certificazione di un velivolo ultraleggero avanzato = Study of the regulatory certification process of an advanced ultralight aircraft. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Pietro Pontieri. Sviluppo di modelli per il progetto e la stima costi del sistema avionico di velivoli senza pilota = Models development for UAV avionics design and cost estimation. Rel. Marco Fioriti, Nicole Viola. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Mattia Ponzio. Ottimizzazione di traiettorie per sistema M2P2 = Trajectory optimization for M2P2 system. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Davide Prino. Automatic Preliminary Assessment of the Mechanical Response of LPT stages. Rel. Christian Maria Firrone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview

Q

• Nicolo' Quartara. Controllo della scia di un autoveicolo mediante getti = Vehicle wake control through jets. Rel. Gaetano Iuso. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Andrea Quinci. Analisi di stabilità di un sistema AUV per il monitoraggio del Mar Mediterraneo. Rel. Paolo Maggiore, Sergio Ferrero, Luciano Scaltrito. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview

R

• Lorenzo Rabagliati. LISA Mission System and Subsystems Trade-off Study with Concurrent Engineering Methodologies. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Umberto Antonio Rammazzo. Realizzazione di un simulatore di Propulsore Aerospaziale Real-Time Avanzato. Rel. Michele Ferlauto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Chiara Ravera. Numerical investigation on aerodynamic stability derivatives of Earth re-entry capsules. Rel. Domenic D'Ambrosio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Luigi Ricca. Sperimentazione di sensori innovativi per implementazione di tecniche prognostiche in campo aerospaziale = Testing of innovative sensors for implementation of prognostic techiques in aerospace environment. Rel. Paolo Maggiore, Matteo Davide Lorenzo Dalla Vedova, Davide Luca Janner, Daniel Milanese. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Jasmine Rimani. HIGH LIFT SYSTEMS FOR PLANETARY DESCENT AND LANDING. Rel. Nicole Viola. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Fabrizio Rizzi. Landing Gear Design for Blended Wing Body Flight Test Demonstrators. Rel. Marco Gherlone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Luca Rizzo. Analysis of bonded joints for composite structures. Rel. Alfonso Pagani, Erasmo Carrera. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Raffaele Rizzo. Progettazione statica del cassone alare di un velivolo Business Jet con rivestimento in composito = Business Jet Aircraft Wing Box Static Design with CFRP skins. Rel. Marco Di Sciuva. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Simone Rizzo. Dinamica instazionaria di un ugello supersonico con Shock Vector Control = Thrust shock vector control of a supersonic nozzle with unsteady conditions. Rel. Michele Ferlauto. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Arturo Romiti. Caratterizzazione di singole tracce di scansione in lega AlSiMg ottenute tramite un processo additivo a deposizione diretta = Characterization of AlSiMg alloy single scan tracks produced via directed energy deposition. Rel. Mariangela Lombardi, Alberta Aversa. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Gerardo Russo. Experimental analysis of pneumatic probes in an unsteady environment. Rel. Roberto Marsilio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview

S

• Edoardo Salente. Preliminary sizing of parachute systems. Rel. Paolo Maggiore, Matteo Davide Lorenzo Dalla Vedova. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Emanuele Sanguineti. Studio di fattibilità tecnico-operativa per la realizzazione di una baia de-icing presso l'aeroporto di Torino-Caselle = Technical-operational study for the development of a de-icing bay at Turin airport. Rel. Paolo Maggiore, Calogero Giammusso. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Nicola Savaglia. Modellizzazione e ottimizzazione di manovre a bassa a spinta in ambito di missioni interplanetarie = Design and Optimization of low thrust maneuvers in interplanetary missions. Rel. Lorenzo Casalino, Cosimo Marcello Chiarelli. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Fabrizio Sbaraglia. Robust and Reliability-Based Design Optimization of a Composite Floor Beam. Rel. Giulio Romeo. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Angelo Scacciavillani. Neural network data analysis for virtual air data sensors. Rel. Piero Gili, Alberto Brandl. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Gandolfo Scialabba. Effects of injector geometry in Air-Jet Vortex-Generator flow control. Rel. Gaetano Iuso, Luigi Vigevano. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Teo Scolpito. Structural and Thermal Prognostics and Diagnostics with Fiber Bragg Gratings. Rel. Paolo Maggiore, Matteo Davide Lorenzo Dalla Vedova, Daniel Milanese, Davide Luca Janner. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Francesco Secchia. Spacecraft – Plasma Interactions for a LEO – GEO Mission Tug with Direct Drive Hall Effect Thruster. Rel. Sabrina Corpino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Fabiano Sgarbi. Trajectories Analysis towards Asteroids using Indirect Methods. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Alex Siniscalco. Escape maneuvers with lunar gravity assists. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Roberto Sorba. Development and validation of an “in-the-loop” simulator for small satellites. Rel. Sabrina Corpino, Fabrizio Stesina. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Matteo Sorrenti. Analisi dinamica di nano-piastre Functionally Graded rinforzate da nanotubi in carbonio su fondazione visco-elastica di Pasternak = Dynamic analysis of Functionally Graded nano-plates reinforced by carbon nanotubes on viscoelastic Pasternak foundation. Rel. Marco Di Sciuva. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Matteo Spina. Simulazione numerica dei fenomeni di interazione fluido struttura in ali ad elevato allungamento. Rel. Enrico Cestino, Giacomo Frulla. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview

T

• Saverio Tavernese. Engine fault diagnosis and modelling of related impact on engine performance. Rel. Lorenzo Casalino, Luciano Galfetti. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Domenico Teodonio. Autonomous landing on asteroids: environment, state-of-the-art control methods and artificial intelligence algorithms. Rel. Sabrina Corpino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Giuseppe Tiani. Applicazione di processi, metodi e strumenti di System Engineering al sistema di Protezione Ghiaccio per un velivolo UAV = Application of processes, methods and tools of System Engineering to the Ice Protection system for a UAV aircraft. Rel. Paolo Maggiore, Nicole Viola. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Giovanni Todaro. Study, integration and Risk analysis of GNSS Augmentation systems. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Eduardo Tola Losa. A dynamic network DEA study in the airline sector: A case of Kyoto Annex 1 countries. Rel. Giulio Romeo. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Marco Tommasi. Modelling of compressible fluids behaviour for LCM applications. Rel. Stefano Berrone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Emanuele Torre. Structural analysis and optimization of the innovative space launch vehicle Bulldog Puppy. Rel. Giancarlo Genta. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Fabio Tosi. Virtual simulation for clutch thermal behaviour prediction. Rel. Roberto Marsilio. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Francesco Tosto. Investigation of performance and surge behavior of centrifugal compressors through CFD simulations. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Irinel-Ciprian Tulbure. Analisi comparativa di modi per la misura della velocità di regressione in endoreattori a propellenti ibridi. Rel. Dario Giuseppe Pastrone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Simone Tumiati. A Multidisciplinary Framework for Aircraft Landing Gear Brake Actuation Design. Rel. Paolo Maggiore, Laura Mainini. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview

V

• Miriana Valentino. Sviluppo di un metodo analitico per la valutazione di strutture spaziali soggette a shock basata su dati analitici e sperimentali = Development of an analytical method for the evaluation of space structures subjected to shock based on analytical and experimental data. Rel. Giulio Romeo. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
• Maurizio Valesani. Escape trajectories exploiting multiple lunar gravity assists. Rel. Lorenzo Casalino, Michele Lavagna. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Alice Pia Vernotico. Sviluppo e applicazione di un modello atto a definire una procedura aziendale per l'imballaggio. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Alessandro Villani. Inverse heat transfer problem applied to CH4/O2 single and multi-element rocket thrust chambers. Rel. Dario Giuseppe Pastrone. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Lorenzo Violi. Dynamic analysis of Carbon Nanotube-Reinforced Piezoelectric Composite for Active Control of Smart Structures. Rel. Erasmo Carrera, Fiorenzo Fazzolari. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Nicola Viscido. Misurazione mediante scansione ottica nel processo di fusione a cera persa: studio su componenti di turbina rotorici e statorici = Optical scan measurement in the investment casting process: turbine blades and vanes case study. Rel. Giulio Romeo. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Mariagrazia Visconti. Numerical investigation of Vortex Shedding phenomenon in SRM using advanced turbulence modeling: prediction of nozzle cavity effect on Pressure Oscillations. Rel. Giulio Romeo, Francesco Larocca. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018

Z

• Umberto Zaffagnini. Metodi di modellazione di gearbox aeronautiche per analisi dinamica di sistema = Best practice for aeronautical gearboxes modeling for system dynamic analysis. Rel. Paolo Maggiore. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Mirko Zafferetti. Turbo-electric propulsion system of a high bypass-ratio turbofan engine for civil liner aircraft. Rel. Lorenzo Casalino. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview
• Angelo Antonio Zagaria. Multidisciplinary Design of Rigid Airship equipped to Superyacht in Collaboration with Pininfarina. Rel. Maria Cinefra, Erasmo Carrera. Politecnico di Torino, Master of science program in Aerospace Engineering, 2018
  

  

  Preview