Amir Shabani
Electrochemical Performance of Ti–10Mo Alloy Produced by Laser Powder Bed Fusion for Biomedical Applications.
Rel. Abdollah Saboori, Amir Behjat. Politecnico di Torino, Corso di laurea magistrale in Ingegneria Dei Materiali Per L'Industria 4.0, 2026
Abstract
This work evaluates the corrosion-related and mechanical performance of a Ti–10Mo alloy produced by Laser Powder Bed Fusion (LPBF) for long-term biomedical implants. LPBF enabled near-fully dense components with an a/a' martensitic matrix, though the Ti–Mo melting-point mismatch (1668 vs. 2623 °C, respectively) resulted in localized heterogeneities from partially unmelted Mo particles. EBSD analysis revealed that Ti–10Mo exhibits a more pronounced transformation texture and stronger crystallographic variant selection than commercially pure Ti, together with a refined microstructure, higher local misorientation, and more elongated prior ß grains along the build direction. Nanoindentation further demonstrated that Ti–10Mo possesses higher hardness and a lower reduced elastic modulus, indicating improved resistance to localized plastic deformation while helping to mitigate stress shielding.
Coupled with electrochemical data in 0.9 wt.% NaCl showing a nobler corrosion potential (Ecorr = -0.17 VAg/AgCl), lower current density (Icorr = 34.48 nA·cm?²), and higher polarization resistance (Rp = 345.94 kO·cm²) compared with LPBF-fabricated commercially pure Ti (Ecorr = -0.44 VAg/AgCl, Icorr = 494.73 nA·cm?², Rp = 61.52 kO·cm²), these findings indicate that Mo addition improves passive-film stability and provides a more favourable combination of corrosion resistance and local mechanical response for high-performance implant applications.
Relatori
Anno Accademico
Tipo di pubblicazione
Numero di pagine
Informazioni aggiuntive
Corso di laurea
Classe di laurea
URI
![]() |
Modifica (riservato agli operatori) |
