Farnam Ranjkesh
Development of Laser Powder Bed Fusion of Ti-6Al-4V + x% Fe; Microstructural and Mechanical Analysis.
Rel. Abdollah Saboori. Politecnico di Torino, Corso di laurea magistrale in Ingegneria Dei Materiali Per L'Industria 4.0, 2026
Abstract
The study assesses how adding iron (Fe) to the Ti-6Al-4V alloy during fabrication can influence the density and microstructural development, along with the mechanical performance of the material produced via Laser Powder Bed Fusion (LPBF). Powder mixtures were created through mechanically blending commercially available powder blends of gas atomized Ti-6Al-4V with 1 wt%, 3 wt%, and 5 wt% elemental iron powder. Processing conditions for the LPBF were identical for each mixture: 200 W laser power, 800 mm/s scanning rate, 0.105 mm hatch spacing, and 30 µm layer height. These processing parameters provided a volumetric energy density of 79.365 J/mm^3 which has been shown to produce highly dense structures and maintain stable melting.
Densities were measured using an Archimedes measurement technique, as well as by X-ray computed tomography (XCT) and optical microscopy
Relatori
Anno Accademico
Tipo di pubblicazione
Numero di pagine
Informazioni aggiuntive
Corso di laurea
Classe di laurea
URI
![]() |
Modifica (riservato agli operatori) |
