polito.it
Politecnico di Torino (logo)

Preparation of bio-based powder for 3D printing applications by Selective Laser Sintering

Giorgio De Trane

Preparation of bio-based powder for 3D printing applications by Selective Laser Sintering.

Rel. Massimo Messori, Giovanna Colucci. Politecnico di Torino, Corso di laurea magistrale in Ingegneria Aerospaziale, 2022

[img]
Preview
PDF (Tesi_di_laurea) - Tesi
Licenza: Creative Commons Attribution Share Alike.

Download (69MB) | Preview
Abstract:

The goal of this case study is to optimize the production of SLS suitable fine powders of sustainable biopolymers and directly assess their printability. Among the biopolymers, PLA is the most widely used in the Fused Deposition Modeling (FDM) hobbyist and enthusiast markets, whereas more invasive polymers such as PA12 are commonly used in Selective Laser Sintering (SLS), the most common 3D printing technology for the production of functional parts. A higher demand for biopolymers in the SLS industry is expected in the near future - following the general sustainability goals of all industries - as the technology allows for the production of more complex geometries and intricate details, as well as ad-hoc parts for the medical industry, where the use of biopolymers is already widespread. The catalogue of biopolymers available for SLS is currently expanding, but still limited, and the production of fine powders is a critical step in the process of producing functional parts. This study focused on PHBH, a copolymer of the Polyhydroxyalcanoate family, with a wider sintering window and thus a higher potential for SLS applications compared to other polymers of the same group. An extensive research on current state-of-the-art production methods, most notably cryogenic mechanical milling and chemical precipitation, led to choosing the latter, since the former does not produce spherical particles, unless further heat treatments are applied, with unpredictable rates of success and potentially high power consumption. An initial recipe for PHBH, previously tested by other researchers, has been tweaked and improved, achieving over a ten-fold increase in pellet-to-powder yield, compared to the very early stages of production. PHBH microspheres were obtained by oil-in-water emulsion solvent evaporation method. The process involves the dissolution of the polymer in chloroform, followed by dripping the viscous liquid in a water solution containing 0.25 % of PVA and stirring the mixture, which leads to the complete solvent evaporation and the polymer precipitation as a fine powder. The resulting powder is then cleaned, dried overnight and sieved, to obtain a final product with a particle size distribution suitable for SLS applications (< 100 &#956;m). Specimens of the obtained powder have been collected and characterized by means of a series of tests, including various thermal analysis methods, such as TGA and DSC, as well as a flowability test and density measurments via gas pycnometer. The SLS suitability of the powder has been further assessed in terms of morphology by Scanning Electron Microscopy (SEM), which revealed a close to ideal distribution of predominantly spherical, non-hollow particles, as also confirmed by granulometry investigations. The powder has been printed on an SLS 3D printer, with single layer and multilayer objects achieving a print quality comparable to that of standard SLS polymers such as PA12. Complex geometries and intricate details have been successfully printed as a proof of concept, as well as prismatic samples.

Relatori: Massimo Messori, Giovanna Colucci
Anno accademico: 2022/23
Tipo di pubblicazione: Elettronica
Numero di pagine: 75
Soggetti:
Corso di laurea: Corso di laurea magistrale in Ingegneria Aerospaziale
Classe di laurea: Nuovo ordinamento > Laurea magistrale > LM-20 - INGEGNERIA AEROSPAZIALE E ASTRONAUTICA
Aziende collaboratrici: NON SPECIFICATO
URI: http://webthesis.biblio.polito.it/id/eprint/25158
Modifica (riservato agli operatori) Modifica (riservato agli operatori)