polito.it
Politecnico di Torino (logo)

On-line fault detection and diagnosis of cyber-physical systems

Michele Giovanni Calvi

On-line fault detection and diagnosis of cyber-physical systems.

Rel. Alessandro Rizzo. Politecnico di Torino, Corso di laurea magistrale in Mechatronic Engineering (Ingegneria Meccatronica), 2018

[img]
Preview
PDF (Tesi_di_laurea) - Tesi
Licenza: Creative Commons Attribution Non-commercial No Derivatives.

Download (2MB) | Preview
Abstract:

In recent years we have seen a rise in the complexity of the architecture of physical systems, as these architectures become more complex also the correct functioning of such systems becomes more complicated. Furthermore, it is possible that an accurate model of the system is not provided therefore, even with complex algorithms to verify it’s proper functioning becomes complicated. The goal of the thesis is to provide a data-driven model where the model of the cyber-physical system (in this case a self driving car) is developed through a black-box model, an LSTM neural network. This network will learn the behavior of the system by providing the states at the next time step and will use these outputs to guarantee safety protocols. First, data from a simulator was obtained which was used to train a neural network to generate the control of the vehicle (steering angle and acceleration), so that a proper environment for a self driving vehicle was available. Second, once the control was developed it was necessary to verify the behavior of the vehicle. This was achieved by using a particle filter which verifies the probability distribution of the states at the next time steps and eventually these states were compared with the safety properties imposed on the vehicle. Once this was achieved a proper model of the system was developed, which in turn was used to verify it’s correctness.

Relatori: Alessandro Rizzo
Anno accademico: 2018/19
Tipo di pubblicazione: Elettronica
Numero di pagine: 57
Soggetti:
Corso di laurea: Corso di laurea magistrale in Mechatronic Engineering (Ingegneria Meccatronica)
Classe di laurea: Nuovo ordinamento > Laurea magistrale > LM-25 - INGEGNERIA DELL'AUTOMAZIONE
Ente in cotutela: UNIVERSITY OF ILLINOIS AT CHICAGO (STATI UNITI D'AMERICA)
Aziende collaboratrici: NON SPECIFICATO
URI: http://webthesis.biblio.polito.it/id/eprint/9534
Modifica (riservato agli operatori) Modifica (riservato agli operatori)